Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Spring Repair for Westminster Homeowners
A broken spring turns your garage door into a dead weight you shouldn’t touch. The door may refuse to lift, hang half-open, or slam down hard enough to shake the frame. This is the highest-risk repair on any garage door, and it’s where we do our most careful work. Our technicians have up to 11 years of experience with torsion and extension springs, and we handle both systems on the doors and openers found in Westminster homes every day. When a spring lets go, call (844) 484-8234 and we’ll get a technician out to you, often the same day. Every price is quoted and agreed before any work starts, so there are no surprises on the invoice.
What Our Garage Door Spring Repair Service Includes
Springs come in two main designs, and each fails in its own way. We work on both, plus the hardware and safety components that surround them.
Torsion Spring Replacement
A torsion spring is the coiled spring mounted on a metal shaft above the door, and it does the heavy lifting by twisting as the door moves. When it winds down or snaps, the door becomes too heavy for the opener to manage, and you’ll hear a loud bang from the garage. We replace torsion springs with matched pairs sized to your door’s weight, because running a new spring against an old one wears both out faster. Our technicians measure wire gauge, inside diameter, and door weight before choosing a replacement, so the new springs match your door rather than a guess.
Extension Spring Replacement
Extension springs stretch along the sides of the door on older track systems, and they stretch and contract with every cycle. They weaken over time and can fail without much warning, which is why a safety cable is essential on this style. We replace extension springs in matched pairs and install or check the safety cables at the same time. If your door uses this setup, we’ll tell you plainly whether it’s worth keeping or whether an upgrade makes more sense.
Broken Spring Repair
A broken spring is a snapped coil, and it usually happens with a sharp crack that leaves the door stuck. The door may still be partly open, which is exactly when a homeowner is most tempted to force it. We handle the broken spring repair safely by relieving tension, removing the damaged coil, and fitting a new spring of the correct size. We never leave a door propped or half-repaired; it goes back to working order before we leave.
Spring Adjustment
Sometimes the spring isn’t broken but the door is out of balance – it drifts, lifts unevenly, or the opener strains to move it. Spring adjustment means resetting the tension so the door’s weight is properly carried by the springs and the opener just guides it. This is often the cheaper fix when the spring has life left in it. We check balance with the door disconnected from the opener and adjust from there.
Safety Cable Installation
Safety cables run through the center of extension springs and catch the spring if it breaks, keeping the pieces from flying across the garage. Many older doors in the Westminster area were built without them, and it’s one of the simplest upgrades we make. If you have extension springs and no cables, we’ll fit them during the same visit. It takes very little time and adds a real layer of protection.
Spring Inspection
Not every spring problem announces itself. A spring inspection looks for the early signs – gaps in the coil, rust, a door that feels heavier than it used to, or a spring that’s been adjusted past its safe range. We examine both springs, the cables, the drums, and the center bearing, because a spring failure often starts with wear somewhere nearby. If everything checks out, we’ll tell you that too rather than selling you a repair you don’t need.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Spring Repair
Springs are sized to the door, not the label, but knowing the door and opener brand tells us a lot about how the whole system was built and where it tends to wear. We service and repair products from Raynor, LiftMaster, Chamberlain, and Genie, among others, and our technicians recognize the hardware each brand uses. If your door carries a Raynor or Clopay label, we know the typical spring configuration and track style that came with it. If your opener is a LiftMaster or Chamberlain, we understand how its drive system reacts to a spring that’s out of balance.
Brand fluency matters when a repair starts with diagnosis. A Genie opener that strains on a heavy door points to one set of causes, while a Chamberlain unit that reverses halfway up points to another. Knowing the equipment means we troubleshoot by how that system is supposed to behave instead of guessing. Whether you have a LiftMaster, a Genie, or any other make, we can help.
We’re not an authorized dealer for any brand, and we won’t pretend otherwise. What we offer is hands-on familiarity with the equipment in your garage and the parts to match.
Signs You Need Garage Door Spring Repair Right Now
Springs rarely fail without some warning. Here’s what to watch for.
- A loud bang from the garage. When a spring snaps, it makes a sharp crack that sounds like a gunshot. That noise usually means a spring has broken and the door should not be operated until it’s checked.
- The door won’t lift or feels extremely heavy. A door that suddenly won’t open, or opens only a foot before stalling, is often fighting a broken or badly weakened spring. Forcing it strains the opener and can bend the tracks.
- The door is crooked or sags on one side. An uneven door usually means one spring is carrying more load than the other. Left alone, that imbalance wears out the good spring faster and stresses the cables.
- A visible gap in the spring coil. Look at the torsion spring above the door or the extension springs along the sides. A clear break or a stretched-out coil is a sign the spring needs replacing, not adjusting.
- Rust, sagging, or a spring that’s been adjusted repeatedly. Heavy rust weakens the wire, and a spring that’s been tightened many times is near the end of its safe range. Both warrant a professional look before they fail.
If you spot any of these, don’t try to operate the door. Call (844) 484-8234 and we’ll arrange a spring repair for you.
Our Garage Door Spring Repair Process – Step by Step
Spring work is dangerous to attempt without the right tools and training, so we approach every job the same careful way.
- 1
We start with a full inspection. Before touching a spring, we look at the door’s balance, the cables, the drums, the tracks, and the opener. This tells us whether the problem is a single spring or part of a larger wear pattern. We also confirm the door’s weight and spring size so the replacement is correct.
- 2
We give you a written estimate up front. You’ll know the price for the repair before we start. If we find something else during the inspection, we explain it and get your agreement before doing any extra work.
- 3
We relieve tension safely. Torsion springs store a lot of energy, and relieving that tension with the correct winding bars is the step most people get wrong. Our technicians use proper tools and follow safe winding procedures so the spring is de-energized before anything is removed.
- 4
We fit the correct replacement springs. We match the new spring to your door’s weight and existing hardware, and we replace springs in pairs when both are the same age. Mismatched springs wear unevenly and shorten the life of the whole system.
- 5
We test the door and walk you through it. After the repair, we cycle the door, check the balance and the opener’s travel, and confirm the safety reverse works. Then we show you what we did and explain how to spot the early signs of wear going forward.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Spring Repair Cost in Westminster?
A typical garage door spring repair in Westminster runs $180 – $340 for one spring. Because springs are usually replaced in matched pairs, a pair costs about twice that range – roughly $360 – $680. The exact price depends on whether you have torsion or extension springs, the door’s size and weight, and whether related parts like cables or drums need attention.
Here’s how the common scenarios tend to break down:
| Service | Typical Estimated Range |
|---|---|
| Spring repair (one spring) | $180 – $340 |
| Matched pair of springs | About twice the single-spring range |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Track realignment | $120 – $240 |
What affects the price. Torsion springs generally cost a bit more than extension springs because the work is more involved. A heavy, oversized, or two-car door needs heavier springs, which cost more. If a broken spring has damaged a cable, drum, or bearing, that adds to the total.
How to avoid overpaying. Get a written estimate before work begins, and make sure it states whether the price is for one spring or a pair. Ask whether related parts are included. A good estimate spells out the parts and labor so you can compare fairly.
What’s included in a free estimate. Our estimate covers the inspection, the diagnosis, and a clear written price. The price we quote is the price you pay – it’s agreed before any work starts, and the written estimate sets the final cost. Call (844) 484-8234 for an exact quote; estimates are free.
Garage Door Spring Repair Near Westminster – Our Service Area
We work throughout Westminster and the surrounding communities, including Federal Heights, Sherrelwood, Northglenn, Broomfield, Arvada, Thornton, and Wheat Ridge. If you’re nearby in Welby, Berkley, Superior, or Louisville, we can help there too. We also handle garage door spring repair for neighbors just outside the city line. When you call, we’ll let you know the soonest we can get a technician to you. For a broader look at everything we do, see Westminster Garage Door Repair Pros.
Serving Westminster, CO – Our Local Coverage Area
We serve Westminster and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Spring Repair in Westminster
Garage door spring repair is the replacement or adjustment of the springs that counterbalance your door’s weight so the opener doesn’t have to lift it alone. Torsion springs sit above the door on a shaft, while extension springs run along the sides. When a spring weakens or breaks, the door becomes too heavy to operate safely. We inspect the system, replace or adjust the spring, and test the door before we finish.
Most spring repairs are finished within a couple of hours once the technician is on site. Replacing a matched pair of torsion springs takes a bit longer than a single extension spring. If related parts need attention, like cables or a bearing, it can add time. We’ll give you a realistic time estimate when we quote the job.
A typical spring repair in Westminster runs $180 – $340 for one spring, with a matched pair about twice that. Cable repair is $130 – $250, and related opener work runs $120 – $320. The written estimate sets the final price, agreed before any work starts. Call (844) 484-8234 for an exact quote; estimates are free.
Yes. We service and repair products from LiftMaster, Chamberlain, Genie, Raynor, Clopay, Amarr, Wayne Dalton, and Craftsman. Knowing the brand helps us diagnose how the opener and door are meant to work together. If your spring problem affects the opener too, we can handle both in one visit.
In most cases we can arrange a same-day visit for a broken spring in Westminster. A door with a broken spring shouldn’t be operated, so call (844) 484-8234 as soon as it happens and we’ll find you the soonest appointment. We’ll confirm the timing when you call.
We stand behind the work and will discuss the specifics of your repair with you before the job starts. Ask about coverage when you get your estimate so you know exactly what’s included. We’d rather you have clear answers up front than assumptions later.
Clear the area around the door and the garage floor so the technician can work safely. Don’t try to open or close the door before we arrive, and keep everyone away from the spring and track area. If you can, note where you heard the noise and how the door is behaving – it speeds up the diagnosis.
Schedule Your Garage Door Spring Repair Service in Westminster Today
A broken spring is one repair you shouldn’t put off or attempt yourself. Our technicians have up to 11 years of experience and handle torsion and extension springs on all major brands. We give you a written, no-obligation estimate before any work begins, and the price we quote is the price you pay. For garage door spring repair in Westminster, call (844) 484-8234 and we’ll get you scheduled.
Written by the team at Westminster Garage Door Repair Pros.